Fire Restoration: Advice for Cleaning Up After a Fire
Surviving a fire is a traumatic event. In addition to the emotional pain of dealing with the aftermath of a fire, you also have to deal with the physical damage left behind. Once the firefighters have fought the fire and everyone is safe, it`s time to start thinking about fire restoration.
Starting step is to call your insurance company, recommends apex restoration. They will send you an adjuster to assess the damage and analyze what will be covered by your policy. Next you have a list of what needs to be finished, you can initiate constructing a strategy for cleaning and repairing your house.
Cleaning Up Smoke and Soot Damage
According to fire damage restoration service knoxville, one of the most important aspects of fire renovation is cleaning up smoke and soot havoc. These dusts are very fine and can get through surfaces like walls, ceilings, and floors. They can also get into your home air system and spread throughout your home, causing further problems.
To repair smoke and soot damage, you need to use specific cleaners and equipment. It`s critical to leave this job to the pro`s because they have the experience and knowledge critical to do it safely and efficiently. Additionally, if you`re on a economical budget, there are some things you can do yourself.
First, open all the windows and doors to ventilate your home. Then, using a sponge or soft cloth, wipe down all surfaces with plain water. You can also use a mild detergent or soap if needed. Be sure to switch your sponge or cloth often because they will quickly become filled with soot.
Once you`ve cleaned all the surfaces in your house, you need to vacuum all the carpets, upholstered furniture, drapes, and blinds. Be sure to use equipment with HEPA filters because they will trap the soot detritus rather than just moving them around. If you don`t have a HEPA vacuum, you can rent one from most hardware stores.
Fixing Water Damage from Firefighting Efforts
Another frequent issue after a fire is water damage from firefighting efforts. This water can get into walls, floors, and other areas of your home, causing mold and mildew growth if not properly sanitized.
To mitigate water damage, start by soaking up any standing water using a wet/dry vacuum or mop and bucket. Additionally, use fans or dehumidifiers to dry out the region as much as possible. Once everything is dry, you`ll need to sanitize all surfaces with disinfectant to prevent mold growth.
Wrap it out
According to Go now, mitigating the damage of a fire is never easy but knowing what needs to be checked off can help make the process less overwhelming. Initiate the process by contacting your insurance company then begin cleaning up smoke and soot damage. Remember to use special cleaners and equipment. Don`t forget to also address any water damage from firefighting efforts by removing standing water then dehumidifying the area completely before disinfecting all areas. Following these tips will assist in get your home back to the way it was as quickly as possible after a fire.